piece of 5/8 plywood - 16" x 24"
piece of 5/8 plywood - 16" x 24"
... or the name of somewhere that has small pieces. I called around but was told they only sell them 4' x 8' and I don't need that much.
# 87
Re: piece of 5/8 plywood - 16" x 24"
Just stop in to your nearest Rona or Home Depot. They smaller pieces available and will cut them to size.
The voices are back. Awesome!
Re: piece of 5/8 plywood - 16" x 24"
I called HD and was told they didn't have any. But yeah that makes sense that they should have all kinds of lefover pieces. I'll go tonite. Tks.
# 87
Re: piece of 5/8 plywood - 16" x 24"
I think I have a few pieces laying around. If I do, I'll bring it to the ride tomorrow Stretch, if that's not too late?
Rod
Rod
'13 KTM 250 xc
Re: piece of 5/8 plywood - 16" x 24"
BTW, I don't have the tools to get this perfectly square. Should I just bring a piece larger than 16" x 24" ?
I can get it close, but it would be by hand (i.e. with a skil saw)...
Rod
I can get it close, but it would be by hand (i.e. with a skil saw)...
Rod
'13 KTM 250 xc
Re: piece of 5/8 plywood - 16" x 24"
No prob. If it's bigger than 16" x 24", I can cut it down to the right size at home
# 87
Re: piece of 5/8 plywood - 16" x 24"
Just wanted to let you know that I found a piece that will fit the bill, will bring it to the ride tomorrow.
'13 KTM 250 xc
- Dobi
- 2024 RMDRA Member
- Posts: 3770
- Joined: Thu Mar 03, 2005 9:33 pm
- Location: deep in the woods on some epic singletrack
- Contact:
Re: piece of 5/8 plywood - 16" x 24"
Rona will do the first 2 cuts for free on a full sheet of plywood, or will do additional cuts for $.50 a piece. They also sell 24 x 24 sheets for convenience.