KTM 300 Dented pipe?
Forum rules
Please read the classified ad rules.
No bumping of classified ads or links to auction sites.
Please read the classified ad rules.
No bumping of classified ads or links to auction sites.
KTM 300 Dented pipe?
New pipe repair taking over - Please see this post: viewtopic.php?f=22&t=8490&p=60708#p60708
Last edited by WRocks on Wed Feb 18, 2009 8:49 am, edited 1 time in total.
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
KTM 300 Dented pipe?
I'm set up with equipment to repair pipes for KTM 300's (may be others? not sure yet). I can pressure the pipes up with high pressure water, which will take out the big dents and straighten the neck. I then drain the water and use heat to remove the smaller dents. Sometimes the pipe bursts when using the water, but I’m able to weld it. I charge $80 no matter how badly damaged it is, Compared to $300 for a new pipe is not a bad deal...
For 2009 RMDRA members, I will discount the cost to $60.
If you have a pipe you'd like repaired PM me or call my cell 710-5988
For 2009 RMDRA members, I will discount the cost to $60.
If you have a pipe you'd like repaired PM me or call my cell 710-5988
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
Re: KTM 300 Dented pipe?
Would you be willing to try a pipe for a 200? I could end up being a regular. It has a couple of small dents and the neck is bent.
Cheers,
Cal
Cheers,
Cal
" Life's a trail, Dig it ! "
- dirtyboy
- 2024 RMDRA Member
- Posts: 6971
- Joined: Sat Dec 11, 2004 5:04 pm
- Location: Calgary, AB
- Contact:
Re: KTM 300 Dented pipe?
I've got a few pipes that need doing. I"ll be contacting you promptly.
Also, I'm moving this post to RMDRA Members Classified.
Also, I'm moving this post to RMDRA Members Classified.
Re: KTM 300 Dented pipe?
Cal,
can you measure the outside diameter (mm) of the necks on both ends? I can then tell you if I can do it.
I have had a caps machined that fit over the ends of a 300 pipe, so the OD's have to match.
can you measure the outside diameter (mm) of the necks on both ends? I can then tell you if I can do it.
I have had a caps machined that fit over the ends of a 300 pipe, so the OD's have to match.
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
Re: KTM 300 Dented pipe?
Dave,
Sorry about being oblivious to the posting rules...
If you're coming, bring your pipes to the exec meeting tommorrow.
Sorry about being oblivious to the posting rules...
If you're coming, bring your pipes to the exec meeting tommorrow.
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
Re: KTM 300 Dented pipe?
Thanks Aaron,
I will measure the pipe today. If they are indeed deferent I can make you what ever you need. Don't worry about the price, I will take care of that. I'm just happy to find some who is fixing pipes.
Cheers,
Cal
I will measure the pipe today. If they are indeed deferent I can make you what ever you need. Don't worry about the price, I will take care of that. I'm just happy to find some who is fixing pipes.
Cheers,
Cal
" Life's a trail, Dig it ! "
Re: KTM 300 Dented pipe?
OD's on both ends are the same for the 200 and 300 pipes.WRocks wrote:Cal,
can you measure the outside diameter (mm) of the necks on both ends? I can then tell you if I can do it.
I have had a caps machined that fit over the ends of a 300 pipe, so the OD's have to match.
- dirtyboy
- 2024 RMDRA Member
- Posts: 6971
- Joined: Sat Dec 11, 2004 5:04 pm
- Location: Calgary, AB
- Contact:
Re: KTM 300 Dented pipe?
No worries WRocks. I'll bring the pipes.
Re: KTM 300 Dented pipe?
Looks like you are in luck Cal.
Give me a call, or bring your pipe to the next members meeting...
Give me a call, or bring your pipe to the next members meeting...
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
Re: KTM 300 Dented pipe?
Cool, I took out the rusty caliper any way and measured. 20.2mm and 50mm. I will try to get it to you for the next meeting.
Thanks,
Aaron
Thanks,
Aaron
" Life's a trail, Dig it ! "
Re: KTM 300-250-200 Dented pipe?
The KTM 300, 250 and 200 have the same port sizes, so I can repair them all. If I can't fix it, there's no charge.
I trying to see how badly smashed they have to be before I can't fix it, so there's a challenge...lol
I trying to see how badly smashed they have to be before I can't fix it, so there's a challenge...lol
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
- dirtyboy
- 2024 RMDRA Member
- Posts: 6971
- Joined: Sat Dec 11, 2004 5:04 pm
- Location: Calgary, AB
- Contact:
Re: KTM 300 Dented pipe?
Challenge will be submitted.
Re: KTM 300 Dented pipe?
Challenge accepted dirtyboy, see attached pictures (and yes it is the same pipe before and after)...
As noted previously, I charge $60 for RMDRA members and $80 for non-members.
However, bring your pipe in clean (free of grease and mud). I'm going to charge an extra $20 if I have to clean the pipe.
As noted previously, I charge $60 for RMDRA members and $80 for non-members.
However, bring your pipe in clean (free of grease and mud). I'm going to charge an extra $20 if I have to clean the pipe.
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
- dirtyboy
- 2024 RMDRA Member
- Posts: 6971
- Joined: Sat Dec 11, 2004 5:04 pm
- Location: Calgary, AB
- Contact:
Re: KTM 300 Dented pipe?
Wow! Looks amazing. WRocks is the mayor of pipe repair street.