Re: 200 making a 'whirring' sound
Posted: Wed May 30, 2012 6:52 am
Great post for the membership!
Where Single Track Enthusiasts Meet
http://forums.rmdra.com/
Tks Hammer. Here's the photo.That's not my dirty fingernail.Hammer wrote:Great post for the membership!
Looks to be the case I would say......a clear case of improper assembly at the factory. That would have been a nasty situation if it eventually let go considering the clearances.dirtyboy wrote:So that bearing in the picture is seized up and the outside race was spinning in the case?
That looks like the inner bearing race to me.dirtyboy wrote:So that bearing in the picture is seized up and the outside race was spinning in the case?
Post is over 6 years old. The OP may not be checking this for replies at this time. All the media has been deleted too.Jeremynicholas wrote:My bike is making the same noise. What is the bearing called. I'll Order one it takes Forever to get anything so it will be a waiting game. Which bearing that it ended up being would be great if you could tell me. Thanks in advance.
I think this was a bad crank bearing. Usually the ignition side go's first.Jeremynicholas wrote:My bike is making the same noise. What is the bearing called. I'll Order one it takes Forever to get anything so it will be a waiting game. Which bearing that it ended up being would be great if you could tell me. Thanks in advance.