TD asked me to take pictures of my stand and measure the arms because he wants to make one. Here it is.
The top arm is 125mm from bolt to bolt and the bottom arm is 95mm from bolt to bolt.
Additionally, the bolt on the middle square channel is 210mm above the base and the bolt on the right side is 115mm from the center of the square channel.
Please let us see how you make it, or at least the finished product.
Build a lift stand
http://justkdx.dirtrider.net/ Go to this site and click KDX tech tips then go to General, scroll down to building a footlift and click on the highlighted words. This lift works great also. WR Dave.
" Old Canadian Tire Supercycle 12 speed Mountain Bike " Good call Porschev !!