Crimp Style Fuel Hose Clamps
Crimp Style Fuel Hose Clamps
Hey I'm changing the in tank filter on my bike and want to use the same style crimp clamps that came on it, but can't seem to locate them at the usual auto supply houses. I don't have time to wait for an order. Anyone know a place that keeps them in stock?
- cerealkiller
- 2024 RMDRA Member
- Posts: 564
- Joined: Fri Apr 06, 2012 9:02 pm
Re: Crimp Style Fuel Hose Clamps
Cycleworks had one when I needed to replace one half of my quick-connect.
-Jared
#44b
#44b
- cerealkiller
- 2024 RMDRA Member
- Posts: 564
- Joined: Fri Apr 06, 2012 9:02 pm
Re: Crimp Style Fuel Hose Clamps
There's a kit on Amazon too if you have Prime: https://www.amazon.ca/Hilitchi-70pcs-St ... 5690392011
-Jared
#44b
#44b
- bikingagain
- 2024 RMDRA Member
- Posts: 569
- Joined: Sun Jan 10, 2010 2:21 pm
- Location: Calgary, SW
Re: Crimp Style Fuel Hose Clamps
I’m pretty sure Home Depot has them in stock. I used them to fix an RV water line. Unfortunately they are with my trailer otherwise you could borrow it.
2018 KTM 300 xc
My Last Fight I Won By Two Blocks.
I Love Single Track. Except For All The Trees
My Last Fight I Won By Two Blocks.
I Love Single Track. Except For All The Trees
- cerealkiller
- 2024 RMDRA Member
- Posts: 564
- Joined: Fri Apr 06, 2012 9:02 pm
Re: Crimp Style Fuel Hose Clamps
Certainly look like the same thing. Says it's for PEX fittings: https://www.homedepot.ca/en/home/p.12-i ... 13657.html
Cheap too. Good call Mike.
Cheap too. Good call Mike.
-Jared
#44b
#44b
Re: Crimp Style Fuel Hose Clamps
Thanks guys. Unfortunately the Home Depot clamps are 1/2" and the in tank filter needs 3/8". I think our resident hillbilly has something for me to use.
- cerealkiller
- 2024 RMDRA Member
- Posts: 564
- Joined: Fri Apr 06, 2012 9:02 pm
Re: Crimp Style Fuel Hose Clamps
3/8" you say... how about these: https://www.homedepot.ca/en/home/p.38-i ... 12274.html
-Jared
#44b
#44b
Re: Crimp Style Fuel Hose Clamps
Sweet, I didn't see those. Thanks Jared!
Re: Crimp Style Fuel Hose Clamps
I have a crimper if you need it.
Robert J Henry
2016 Husqvarna FE350
2016 Husqvarna FE350
Re: Crimp Style Fuel Hose Clamps
Thanks Robert, I have one already, from doing PEX work.
Re: Crimp Style Fuel Hose Clamps
BTW, anyone looking to do the same, the oem filter is quite expensive, and there are readily available matching spec filters available from your local auto parts store.
Re: Crimp Style Fuel Hose Clamps
3/8" clamps are too big for this job...
- malcolmzilla
- 2024 RMDRA Member
- Posts: 879
- Joined: Fri Jun 26, 2009 11:14 am
Re: Crimp Style Fuel Hose Clamps
in the absence of a suitable oetiker clamp, the parts stores often have stainless "fuel line" clamps that will work.
Re: Crimp Style Fuel Hose Clamps
Auto value has fuel injection hose clamps similar to what Malcolm posted. You don’t need any special crimping tool and they are designed to not cut or bind the hose.
KTM 300 XCW
#184A
#184A
Re: Crimp Style Fuel Hose Clamps
I used the clamps Malcolmzilla shows with good success, replaced the fuel pump on my Burg.