Little black O-ring? carb 36mm pwk 2015 300xcw
Posted: Wed May 17, 2017 4:46 pm
Can't see that well up close so need some help with little carb parts.
2015 300 xcw stock carb is Keihin 36S AG
I removed pilot jet, starter jet, needle and main jet.
1) After cleaning my carb I found a little black O-ring in the bucket of gasoline. Anyone know where it goes?
I did not remove the jet block.
2) Also a spring which came from the Air screw came with a metal washer about the size of the O-ring, I'm guessing that metal washer was also on the air screw on the knob side from the spring.
Thanks for any help.
Patrick
2015 300 xcw stock carb is Keihin 36S AG
I removed pilot jet, starter jet, needle and main jet.
1) After cleaning my carb I found a little black O-ring in the bucket of gasoline. Anyone know where it goes?
I did not remove the jet block.
2) Also a spring which came from the Air screw came with a metal washer about the size of the O-ring, I'm guessing that metal washer was also on the air screw on the knob side from the spring.
Thanks for any help.
Patrick