yep. Glad to see you $$$ up and joined too See you out there for ride this year!DoC wrote:So I'm assuming best to just PM him through here?
KTM 300 Dented pipe?
Forum rules
Please read the classified ad rules.
No bumping of classified ads or links to auction sites.
Please read the classified ad rules.
No bumping of classified ads or links to auction sites.
Re: KTM 300 Dented pipe?
- dirtyboy
- 2024 RMDRA Member
- Posts: 6971
- Joined: Sat Dec 11, 2004 5:04 pm
- Location: Calgary, AB
- Contact:
Re: KTM 300 Dented pipe?
Actually JocDoc is a club sponsor. Thanks!steve-o wrote:yep. Glad to see you $$$ up and joined too
Re: KTM 300 Dented pipe?
dirtyboy wrote:Actually JocDoc is a club sponsor. Thanks!steve-o wrote:yep. Glad to see you $$$ up and joined too
I'm refering to DoC, which I'm pretty sure isn't JocDoc. Confusing at first, I had to look twice too. DoC is on a 2 hundy and JocDoc roosts on the 3 hundo.
- dirtyboy
- 2024 RMDRA Member
- Posts: 6971
- Joined: Sat Dec 11, 2004 5:04 pm
- Location: Calgary, AB
- Contact:
Re: KTM 300 Dented pipe?
Darn you got me there. I'll shut up now.....
Re: KTM 300 Dented pipe?
If you have any pipes that need to be fixed, either get them to me at the club meeting this Thurs or early next week at the latest.
With spring around the corner and things getting busy, getting your pipe repaired on short notice is not going to be likely. Don't leave it till the week before May long, because I won't be able to do it...Make sure the pipe is clean!!!
Thanks,
With spring around the corner and things getting busy, getting your pipe repaired on short notice is not going to be likely. Don't leave it till the week before May long, because I won't be able to do it...Make sure the pipe is clean!!!
Thanks,
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
Re: KTM 300 Dented pipe?
Aaron,
I might have mine to do again. Damn things don't last long before I kink the neck on a tree or light lay-over. I'm always good for denting these tinfoil pipes.
Will let you know.
I might have mine to do again. Damn things don't last long before I kink the neck on a tree or light lay-over. I'm always good for denting these tinfoil pipes.
Will let you know.
03 Honda XR650R Dualsported
Re: KTM 300 Dented pipe?
I can do Gas Gas pipes now too, but you'll have to get the plug required to do it from Zeal, as he paid to have it machined.
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
Re: KTM 300 Dented pipe?
Since Corner Grass and Western CEC's are finished, get me those KTM pipes to repair ASAP, I'll be busy soon again and won't have time for a couple months to do them...
I'll have time this week to do some...
I'll have time this week to do some...
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
Re: KTM 300 Dented pipe?
Update on your schedule Aaron?
I just cracked my stock pipe this weekend and need to get my new to me Gnarly straightened so it fits my bike!
I just cracked my stock pipe this weekend and need to get my new to me Gnarly straightened so it fits my bike!
03 Honda XR650R Dualsported
- Dobi
- 2024 RMDRA Member
- Posts: 3770
- Joined: Thu Mar 03, 2005 9:33 pm
- Location: deep in the woods on some epic singletrack
- Contact:
Re: KTM 300 Dented pipe?
I have 2 that need some love also....Shibby! wrote:Update on your schedule Aaron?
I just cracked my stock pipe this weekend and need to get my new to me Gnarly straightened so it fits my bike!
Re: KTM 300 Dented pipe?
I am tied up this week and am away this weekend.
I have a cap made now to do 2011 KTM pipes as well, so can do all KTM 2 stroke pipes.
Next club meeting is Nov 4th, so bring them to the meeting or drop them off at my house anytime that week (PM me for the adress).
I'll do my best to get to them on the weekend of Nov 6-7th.
Thanks,
I have a cap made now to do 2011 KTM pipes as well, so can do all KTM 2 stroke pipes.
Next club meeting is Nov 4th, so bring them to the meeting or drop them off at my house anytime that week (PM me for the adress).
I'll do my best to get to them on the weekend of Nov 6-7th.
Thanks,
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
-
- User
- Posts: 15
- Joined: Tue Apr 28, 2009 12:02 pm
Re: KTM 300 Dented pipe?
I have 3 (maybe 4) that require repair!!
They are for my 250xc..which is the same pipe as the 300.
Are you able to fix them? And how do I get them to you? drop them off?? Are you going to be at the swap on the 2nd??
Thanks!
Candace
They are for my 250xc..which is the same pipe as the 300.
Are you able to fix them? And how do I get them to you? drop them off?? Are you going to be at the swap on the 2nd??
Thanks!
Candace
Re: KTM 300 Dented pipe?
Candeegirl PM sent
If anyone else has any pipes in need of repair, please bring them to the swap meet. I perfer to do large batches of them and don't do them very often.
Thanks,
If anyone else has any pipes in need of repair, please bring them to the swap meet. I perfer to do large batches of them and don't do them very often.
Thanks,
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
Re: KTM 300 Dented pipe?
I only fix KTM pipes...2008 and up 300/250/200 XC-XCW I also have caps for the new 2011 pipes.
I can do GasGas pipes, but you have to contact Zeal and "rent" his caps (it's up to you to make a deal with him, as he paid to have the caps made). If you bring a GG pipe and caps, I'll do it.
That's it, NO Japanese 2T pipes (you can send these to Pacific Crest), NO 4 stroke pipes (I'm not aware of any one who does these).
New pricing...
Still $60 for club members and $80 for non-members. Pipes must be clean and all loose hardware removed (no change here...)
However, any pipes that have been previously welded on (other than by me) or require neck cracks welded will be a $20 surcharge.
I'm getting too many pipes that have cracks in the neck area or whom have tried to weld themselves. These require a lot of extra time to weld up to get a positive pressure test.
I can do GasGas pipes, but you have to contact Zeal and "rent" his caps (it's up to you to make a deal with him, as he paid to have the caps made). If you bring a GG pipe and caps, I'll do it.
That's it, NO Japanese 2T pipes (you can send these to Pacific Crest), NO 4 stroke pipes (I'm not aware of any one who does these).
New pricing...
Still $60 for club members and $80 for non-members. Pipes must be clean and all loose hardware removed (no change here...)
However, any pipes that have been previously welded on (other than by me) or require neck cracks welded will be a $20 surcharge.
I'm getting too many pipes that have cracks in the neck area or whom have tried to weld themselves. These require a lot of extra time to weld up to get a positive pressure test.
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT
Re: KTM 300 Dented pipe?
Are you doing a bunch of pipes any time in the near future? I have one, Paul