2012 KTM XCW -XC 200

Buy, sell or trade motorcycles in this forum.
Forum rules
Please read the classified ad rules.
No links to auction sites.
No bumping of classified ads.
Locked
trailguy
2024 RMDRA Member
2024 RMDRA Member
Posts: 1191
Joined: Fri May 23, 2008 6:18 pm

2012 KTM XCW -XC 200

Post by trailguy »

Looking at selling my garage queen 200. I purchased this bike new in 2012 and put approx. 70 hours on it. It has basically sat since then as I wanted to keep the last of the light weight 200"s. In 2012 they weighed 208 lbs. wet without gas, in 2013 they went to 2019 lbs. with E start and other add- ons. I have added several new parts and mods over the years but never did ride the bike other than a couple of very short grass track rides.
-Carbon skid plate.
-P3 Carbon pipe guard.
-Scalvini Alum/carbon muffler.
-TM Designs chain guide.
-EE Clutch Slave guard.
-Rad guards.
-Boyesen Rad valve.
-Power Now carb wing.
-Sub- frame chopped and welded by Derrek at Trillion Ind. to lower rear of bike and lower seat height and balance front to back. (Derrek is probably the best welder in town).
-XC Closed cartridge blader forks.
-Newer style SX forged black triple clamps, this also was to run the newer style front fender/ No. plate. Not a fan of the old "V" style front fender.
-Newer light weight SX Brembo front caliper.
-PHDS bar clamps and Tag bars.
- Langston LS01 light progressive rear spring.
-Full meal deal Pro-Action suspension front and rear, bladder kit, valve body's, valving and a few other tricks to make these the best off-road forks I have ridden. Simply magic on roots/rocks. I have ridden every WP fork that has come on KTM's and the only fork that compares to these is the new AER fork.
-I raced KTM 200's from 1999 to 2013, so this bike has several of mods /set up tricks.
-Chain and sprockets almost new, RK X-ring, Vortex/Renthal.
-New KTM wheelset with new brake rotors. New rear pads.
-New tires, Dunlop MX3S front, Pirelli rear.
-Lots of Hard parts Accessories.
-Front end plastic is new, the rest of the plastic does not have a scratch on it.
-Before adding any guards this bike would be 204 -205 lbs. wet without gas.
-The newer year front end SX/XC mods - forks, triple clamps, Caliper, plastic and the PHDS clamps are approx. a $5000.00 upgrade.
-$8200.
I have alot of spares I will add later, Filters, gaskets, etc.
Attachments
IMG_9555_1.JPG
IMG_9546_1.JPG
IMG_9547_1.JPG
IMG_9550_1.JPG
IMG_9549_1.JPG
IMG_9552_1.JPG

trailguy
2024 RMDRA Member
2024 RMDRA Member
Posts: 1191
Joined: Fri May 23, 2008 6:18 pm

Re: 2012 KTM XCW -XC 200

Post by trailguy »

Couple more pics & spares.
-Air filter wash cover.
-2 spare filters, one is brand new.
- Hand guards.
-Pipe O-rings, head & basket gaskets, Impeller seal, Engine o-rings.
- spare clutch lever and brake pedal tip.
Attachments
IMG_9559_1.JPG
IMG_9548_1.JPG
IMG_9558_1.JPG

trailguy
2024 RMDRA Member
2024 RMDRA Member
Posts: 1191
Joined: Fri May 23, 2008 6:18 pm

Re: 2012 KTM XCW -XC 200

Post by trailguy »

$7800.00

trailguy
2024 RMDRA Member
2024 RMDRA Member
Posts: 1191
Joined: Fri May 23, 2008 6:18 pm

Re: 2012 KTM XCW -XC 200

Post by trailguy »

SOLD.

Locked