KTM parts, shop parts and a bike stand
Forum rules
Please read the classified ad rules, but here are a few rules below.
Off-Road Motorcycle Parts and Accessories only.
Creating multiple ads isn't allowed.
Create one ad with multiple items.
No bumping of classified ads.
All items must have a price.
These rules will be enforced by deletion.
Please read the classified ad rules, but here are a few rules below.
Off-Road Motorcycle Parts and Accessories only.
Creating multiple ads isn't allowed.
Create one ad with multiple items.
No bumping of classified ads.
All items must have a price.
These rules will be enforced by deletion.
- Dobi
- 2024 RMDRA Member
- Posts: 3770
- Joined: Thu Mar 03, 2005 9:33 pm
- Location: deep in the woods on some epic singletrack
- Contact:
KTM parts, shop parts and a bike stand
I bought a new starter for my 14 300XC, replaced it, hit the button once and realized it was the bendix Starter has a handful of revolutions and is an OEM KTM starter. Not a cheapo ebay one. Buy the starter and I will throw in a very lightly used crown wheel (I upgraded to the 15 model with the new bendix) $300 (retail is $437.99)
brand new brembo front brake rebuild kit for a 2013 and older bike (so much for keeping parts in stock) $35
Matrix bike stand (new) - $80
3/8 drive socket rack I also have 1/4 drive not shown (new) $10 both
shoot me a text or call to 403-389 eleven26- Dobi
- 2024 RMDRA Member
- Posts: 3770
- Joined: Thu Mar 03, 2005 9:33 pm
- Location: deep in the woods on some epic singletrack
- Contact:
Re: KTM parts, shop parts and a bike stand
new price on the brake kit - $25
new price on the stand - $50
New price on the socket holders - Free
new price on the stand - $50
New price on the socket holders - Free
-
- User
- Posts: 49
- Joined: Thu Aug 29, 2013 8:07 pm
Re: KTM parts, shop parts and a bike stand
I'm not in town for another couple weeks but if the stand is still there i'll take it.
- Dobi
- 2024 RMDRA Member
- Posts: 3770
- Joined: Thu Mar 03, 2005 9:33 pm
- Location: deep in the woods on some epic singletrack
- Contact:
Re: KTM parts, shop parts and a bike stand
stand is still here. I will put it in the pending pile. Shoot me a text 403-389-1226 when you get into town.
Re: KTM parts, shop parts and a bike stand
I'll take the brake rebuild kit if you still have it. My front brake is weird. It often needs to be pumped up a bit but then its fine. The last time I rode my bike, it was literally no pressure to the bar. I did the Shane Watts knee thing with the front caliper and then brake was back. But it never feels squishy as tho it had air in the lines. Maybe rebuilding the master will help?
- Dobi
- 2024 RMDRA Member
- Posts: 3770
- Joined: Thu Mar 03, 2005 9:33 pm
- Location: deep in the woods on some epic singletrack
- Contact:
Re: KTM parts, shop parts and a bike stand
brake rebuild is still there. It should help. One of the other tricks I have learned with the Brembos is that you have to change fluid often and bleed at the bleeder, as well as at the banjo bolts. It made a big difference on my 2014
- Dobi
- 2024 RMDRA Member
- Posts: 3770
- Joined: Thu Mar 03, 2005 9:33 pm
- Location: deep in the woods on some epic singletrack
- Contact:
Re: KTM parts, shop parts and a bike stand
all parts sold, except the socket organizers. I will move them to the giveaways section