Used WP 4.2 fork springs for open chamber/xcw forks $70
New WP 69-250 shock spring $90
Used WP 72-250 shock spring $60
Used WP 76-250 shock spring $60
KTM springs
Forum rules
Please read the classified ad rules, but here are a few rules below.
Off-Road Motorcycle Parts and Accessories only.
Creating multiple ads isn't allowed.
Create one ad with multiple items.
No bumping of classified ads.
All items must have a price.
These rules will be enforced by deletion.
Please read the classified ad rules, but here are a few rules below.
Off-Road Motorcycle Parts and Accessories only.
Creating multiple ads isn't allowed.
Create one ad with multiple items.
No bumping of classified ads.
All items must have a price.
These rules will be enforced by deletion.
KTM springs
KTM 300 XCW
#184A
#184A
Re: KTM springs
I'm debating which spring would be best for 190# w/o or 220# w/gear on same bike, 7.2 or 7.6, any advice? A fork spring suggestion would be cool too?
Re: KTM springs
What bike do you have? A 250? The 250 designation is the length of the spring in mm.
KTM 300 XCW
#184A
#184A
Re: KTM springs
sorry I was referring to the bike on the bottom of your post(signature). Mine is actually a 200 w/electric start, only 5lb lighter I think.
Re: KTM springs
I would think you need the 76-250 but I'm not %100 sure. Fork springs probably 46s
KTM 300 XCW
#184A
#184A
Re: KTM springs
drapp10 wrote:I'm debating which spring would be best for 190# w/o or 220# w/gear on same bike, 7.2 or 7.6, any advice? A fork spring suggestion would be cool too?
drapp10 wrote:sorry I was referring to the bike on the bottom of your post(signature). Mine is actually a 200 w/electric start, only 5lb lighter I think.
I run a 72-250 on my Husaberg and am 200+/- 10 lbs. I would expect the 76-250 would be quite stiff for a 200, even for a fellow of fine musculature similar to my own.boland wrote:I would think you need the 76-250 but I'm not %100 sure. Fork springs probably 46s
The race tech calculator actually recommended the stock spring rate (67 kg/mm) for a 190 lb (bare) rider but they did try to sell a progressive spring...
Others may have good advice but it might get missed in this forum... better to search and read a little and then post in Technical if you still have questions.
Hope that helps!
RJH
Robert J Henry
2016 Husqvarna FE350
2016 Husqvarna FE350
Re: KTM springs
Most people (including myself on a 10 XC) would say it's the free sag thats critical. Set your rider sag, ~100mm to 110mm depending on what you like, and you should have 30mm under the bikes own weight. to little? spring is too soft (you have the adjuster cranked) too much ... you get the idea.
I ran the Race tech spring rates, and had no trouble at the MX track. I would be on the softer side for the riding around here. Big springs + lots of valving to control them = harsher ride.
Just my $0.02
I ran the Race tech spring rates, and had no trouble at the MX track. I would be on the softer side for the riding around here. Big springs + lots of valving to control them = harsher ride.
Just my $0.02
Re: KTM springs
Pm sent for the 7.2
Re: KTM springs
Still available
I have had some emails regarding shipping them and online payments. Sorry but I will only accept cash and pick up in person on Calgary.
I have had some emails regarding shipping them and online payments. Sorry but I will only accept cash and pick up in person on Calgary.
KTM 300 XCW
#184A
#184A