I built a couple these that will work for the
- KTM SXF (2016+)
- KTM XCF (2016+)
- KTM SXF Factory Edition
- KTM 350 EXC (2017+)
- Husqvarna FC (2016+)
This is a plug and play solutions inspired by the penny tech post by cedric viewtopic.php?f=3&t=12067
No need for a 5v power supply, just plug inline with the TPS and connect your multimeter to the orange and black leads to get a reading. You can start the bike with the tool connected, play with the idle adjustment or even ride the bike. The white wire can be used to supply a 5v control voltage, if you only connect one end of the tool directly to the TPS(not what I recommend for various reasons), better to use the actual reference voltage generated by the ECU on the bike
I am asking $20
I only have 2 units and one is tentative sale
TPS Adjustment Tool
Forum rules
Please read the classified ad rules, but here are a few rules below.
Off-Road Motorcycle Parts and Accessories only.
Creating multiple ads isn't allowed.
Create one ad with multiple items.
No bumping of classified ads.
All items must have a price.
These rules will be enforced by deletion.
Please read the classified ad rules, but here are a few rules below.
Off-Road Motorcycle Parts and Accessories only.
Creating multiple ads isn't allowed.
Create one ad with multiple items.
No bumping of classified ads.
All items must have a price.
These rules will be enforced by deletion.
- axel99
- 2024 RMDRA Member
- Posts: 1277
- Joined: Fri May 26, 2006 9:06 am
- Location: Scouting 2017 Dirtier Moose
Re: TPS Adjustment Tool
The 2 TPS tools I had are gone. I will likely be making another parts order in the spring, so shoot me a PM if you one before the riding season.
#Z3B
Re: TPS Adjustment Tool
Hey I'm new to the forum/club and can't seem to figure out how to PM you. I'll take one if you can make one for a 14 FE350, shoot me a PM as I know how to respond