Greetings,
I have been away from the club for a few years riding a variety of on-road bikes. After a Victory, KTM 690 and a Z750 Finally settled on a 2014 Triumph Scrambler that I have modified for off-road. I am looking for ice screws to run it on Ghost Lake this winter. Any guidance on where to get them will be appreciated.
Thanks,
Gord
Ice Screws Needed for Triumph Scambler
Re: Ice Screws Needed for Triumph Scambler
I think Blackfoot Direct has them.
Re: Ice Screws Needed for Triumph Scambler
For the ice on a lake you want cold cutters, or the gold screws. Go see cycle works I'm sure they'll do a better job of 'hooking' you up.
Re: Ice Screws Needed for Triumph Scambler
We have both the 1/2" and 5/8" Gold Ice Screws which as the guy mentioned above are the best if you plan on being on pure ice and using just stock tires to modify.
There other optiones out there depending on how hardcore you want to be. But just for some casual riding this is the easiest and cheapest way.
The Grip Studs that many people on here talk about are mainly for winter off-road riding (frozen ground single track). Not something i assume you will be taking your scrambler on!
Feel free to give us a call at the show if you have any question as we would be more than happy to walk through some suggestions for you.
There other optiones out there depending on how hardcore you want to be. But just for some casual riding this is the easiest and cheapest way.
The Grip Studs that many people on here talk about are mainly for winter off-road riding (frozen ground single track). Not something i assume you will be taking your scrambler on!
Feel free to give us a call at the show if you have any question as we would be more than happy to walk through some suggestions for you.