Laser Cutting
- Dakota_c69
- 2024 RMDRA Member
- Posts: 777
- Joined: Thu Feb 10, 2005 2:49 pm
- Location: Buying more Dilly Bars!
Laser Cutting
Looking for a company that does laser cutting, or something similar, that can precision cut 3mm thick cast acrylic.
_______
Glenn.
2018 KTM 250 XC
2015 Beta 300RR
2013 KTM 450XC-W
"Never run out of real estate, traction & ideas at the same time"
Glenn.
2018 KTM 250 XC
2015 Beta 300RR
2013 KTM 450XC-W
"Never run out of real estate, traction & ideas at the same time"
Re: Laser Cutting
Try Aaron machine shop. They have a water jet that should be able to cut acrylic without heat distortion.
The voices are back. Awesome!
Re: Laser Cutting
I have had lots of work done there...great shop.
Their water jet should rip 3mm through acrylic. Should be able to cut 150-200 inches/min or more (if it can move that fast)
Machine goes for ~$180-200/hour if I recall correctly.
If you can make your own .dxf file will be your cheapest option, as it saves you the cost of having them do the drafting.
Their water jet should rip 3mm through acrylic. Should be able to cut 150-200 inches/min or more (if it can move that fast)
Machine goes for ~$180-200/hour if I recall correctly.
If you can make your own .dxf file will be your cheapest option, as it saves you the cost of having them do the drafting.
RMDRA lifetime member
2013 350 XCF
2015 450 SXF with Timbersled MHLT
2013 350 XCF
2015 450 SXF with Timbersled MHLT