Search found 107 matches
- Tue Jul 17, 2018 12:39 pm
- Forum: Technical
- Topic: 2018 TX300 questions
- Replies: 26
- Views: 18570
Re: 2018 TX300 questions
I have run JD kits in the past with good luck, especially when running an SX head 162 main and a 38 pilot. L needle in the 2nd from top position (I can never remember how to label them) I have gone as low as 158. but it hurts the top end run out at lower elevation and heavy loads. Curious is the L ...
- Tue Jul 17, 2018 11:53 am
- Forum: Technical
- Topic: 2018 TX300 questions
- Replies: 26
- Views: 18570
Re: 2018 TX300 questions
I have run JD kits in the past with good luck, especially when running an SX head 162 main and a 38 pilot. L needle in the 2nd from top position (I can never remember how to label them) I have gone as low as 158. but it hurts the top end run out at lower elevation and heavy loads. Curious is the L ...
- Mon May 07, 2018 12:59 pm
- Forum: Technical
- Topic: 2018 TX300 questions
- Replies: 26
- Views: 18570
Re: 2018 TX300 questions
FYI put a old ktm hard parts fan kit on the new 300. The bracket was different but ktm happens to sell just the brack from there exc’s for cheap! Cost $20 with the bracket and four screw.
Oh and put the pwk36 on and it’s just what I was looking for.
Oh and put the pwk36 on and it’s just what I was looking for.
- Tue May 01, 2018 8:14 am
- Forum: Technical
- Topic: 2018 TX300 questions
- Replies: 26
- Views: 18570
Re: 2018 TX300 questions
I have run JD kits in the past with good luck, especially when running an SX head 162 main and a 38 pilot. L needle in the 2nd from top position (I can never remember how to label them) I have gone as low as 158. but it hurts the top end run out at lower elevation and heavy loads. Excellent thanks....
- Mon Apr 30, 2018 12:32 pm
- Forum: Technical
- Topic: 2018 TX300 questions
- Replies: 26
- Views: 18570
Re: 2018 TX300 questions
I've got an 18 300XC and love it. I don't run a fan and have never done so on a 2 stroke. Just route the breather to the back of the bike so it doesn't give you a facial :blush: I go back and forth on gearing. I ran a 50 rear in kamloops and noticed that first was really tall compared to the 52 I n...
- Thu Oct 26, 2017 1:36 pm
- Forum: Technical
- Topic: Has anyone tried the Leatt helmets?
- Replies: 7
- Views: 1011
Re: Has anyone tried the Leatt helmets?
I accidentally tested the gpx5.5 and pretty sure it did its job. Was alittle sore but back to work the next day. Replaced it with a gpx6.5. The weight differences is so small its hardly worth mentioning. The fit with the leatt neck brace is oddly perfect. Also the ventilation is a incredible.
- Sat Apr 30, 2016 1:53 pm
- Forum: Technical
- Topic: Who has a Beta X Trainer?
- Replies: 10
- Views: 1936
Re: Who has a Beta X Trainer?
Twisted Shifter in Eckville has or had a demo xtrainer. It was a demo but believe it might be forsale now.
- Thu Nov 15, 2012 7:16 am
- Forum: Parts and Accessories For Sale
- Topic: A Bunch of Yamaha Parts
- Replies: 6
- Views: 17093
Re: A Bunch of Yamaha Parts
The Rekluse is sold. Still have everything else for sale.
- Thu Oct 04, 2012 6:34 am
- Forum: Technical
- Topic: 250F in the woods
- Replies: 5
- Views: 2816
Re: 250F in the woods
I had no problems getting around on my 07 250 XCF-W. I could climb everything that I could on my 450. You did have to carry a bit more speed though. It also worked good for the races around here. Could of used just alittle more bottom end but still it wasn’t bad. 150hrs on it and did piston/rings an...
- Sun Sep 30, 2012 10:09 pm
- Forum: Parts and Accessories For Sale
- Topic: A Bunch of Yamaha Parts
- Replies: 6
- Views: 17093
Re: A Bunch of Yamaha Parts
I still have everything but the blue billet parts the oversize rotor and the rear shark fin.
- Sat Sep 08, 2012 11:33 pm
- Forum: Parts and Accessories For Sale
- Topic: A Bunch of Yamaha Parts
- Replies: 6
- Views: 17093
Re: A Bunch of Yamaha Parts
A few more parts! Moose Shark Fin Rear Disc Guard $65 http://i.imgur.com/vXmSl.jpg Yamaha GYTR Offroad Flywheel #GYT-2S297-50-50 $70 http://i.imgur.com/z4Ctf.jpg New never used blue Renthal bars. $65 http://i.imgur.com/06UgV.jpg BRAKING 270 Oversized Rotor Kit with new OEM pads $175 http://i.imgur.c...
- Sat Sep 08, 2012 11:31 pm
- Forum: Parts and Accessories For Sale
- Topic: A Bunch of Yamaha Parts
- Replies: 6
- Views: 17093
A Bunch of Yamaha Parts
I got a ton of parts from my last bike. I don't need them taking up room in the garage anymore. All of these parts were on a 2007 YZ 450 but some will fit multiple different model. Most of these parts also only have one season of use on them. I got a lot more pictures if needed. Rekluse EXP 2.0 Clut...
- Sat Sep 08, 2012 10:07 pm
- Forum: Parts and Accessories For Sale
- Topic: Yamaha Wheels
- Replies: 4
- Views: 448
Re: Yamaha Wheels
The rims are nice and straight. There are a few marks on the rims from changing tires but other then that there in excellent shape. They might have a season and a half on them.
- Tue Sep 04, 2012 3:27 pm
- Forum: Parts and Accessories For Sale
- Topic: Yamaha Wheels
- Replies: 4
- Views: 448
- Tue Sep 04, 2012 1:32 pm
- Forum: Parts and Accessories For Sale
- Topic: Yamaha Wheels
- Replies: 4
- Views: 448
Yamaha Wheels
Set of wheels that were on a 2007 YZ450, will fit multiple different models and years. Rad eagle light hubs with Excel 21" rim and 18" Excel rim or can sell it with a 19" Rad rim. Rear rotor is in excellent shape and 48T Renthal sprocket.. Also have a stock front rotor not shown but is in good shape...