Search found 26 matches
- Sun Apr 27, 2014 9:28 am
- Forum: Technical
- Topic: Spark plug
- Replies: 5
- Views: 2945
Re: Spark plug
http://www.ngksparkplugs.com/tech_support/spark_plugs/p2.asp?mode=nml" onclick="window.open(this.href);return false;[/quote] From website: "The most serious result of selecting a heat range that is too hot is overheating. Overheating will cause the electrodes to wear quickly and can lead to pre-igni...
- Sun Apr 27, 2014 9:01 am
- Forum: Want Ads
- Topic: HELP! Thread insert - helicoil
- Replies: 7
- Views: 895
Re: HELP! Thread insert - helicoil
Just checked my set and I only have 12mm and larger. Sorry. This doesnt fix your problem and it isnt always possible/practical but thought Id throw it out there anyway. Threaded holes in frames, cases, engine blocks are always subject to damage every time a fastener is threaded into the hole. On my ...
- Sat Nov 16, 2013 5:12 pm
- Forum: Technical
- Topic: Chains and Sprockets?
- Replies: 16
- Views: 1063
Re: Chains and Sprockets?
A good tip I picked up is to remove the shock (easy on PDS) and cycle the swingarm, ensuring no binding, set the chain tension. When I got my first mx bike back in the early 80s went through several drive line components in the first year and couldnt figure it out. my dad got sick of paying and did...
- Thu Nov 14, 2013 8:04 am
- Forum: Technical
- Topic: Battery Charger
- Replies: 12
- Views: 802
Re: Battery Charger
after posting the pics, it made sense to me. The size of charger helps in that discussion. i do have a 12V charger for my trailer batteries, hence series. i want to hook up 3 separate motorcycle batteries to the battery tender. What size (gauge) wire can i get away with in hooking them all up in pa...
- Wed Nov 13, 2013 2:43 pm
- Forum: Technical
- Topic: Battery Charger
- Replies: 12
- Views: 802
Re: Battery Charger
^^^^ Exactly. If you hook them in parallel the bank voltage will remain the same as each individual battery, in series the voltage is additive. Two 6 volt batteries in parallel will produce 6 volts, two 6 volt batteries in series will produce 12 volts. If you had two 12 volt batteries in series a 12...
- Mon Nov 04, 2013 9:48 pm
- Forum: Ride Reports / Areas
- Topic: Sand Riding for the Winter
- Replies: 8
- Views: 912
Re: Sand Riding for the Winter
Ya, first time I was there I was in early late may early june, it was 33 deg during the day and on my way back highways was threatening to close some highways due to high flood risk from melting snow pack. Its almost 5000 feet elevation.
- Mon Nov 04, 2013 2:08 pm
- Forum: Ride Reports / Areas
- Topic: Sand Riding for the Winter
- Replies: 8
- Views: 912
Re: Sand Riding for the Winter
RJHenry wrote:
54.6 annual inches of snow is a problem?
- Mon Nov 04, 2013 9:51 am
- Forum: Ride Reports / Areas
- Topic: Sand Riding for the Winter
- Replies: 8
- Views: 912
Re: Sand Riding for the Winter
Great dune riding in the summer.......
http://en.wikipedia.org/wiki/Rexburg,_Idaho#Climate
not so much in the winter.
Twitch, I have only ever ridden dunes at st anthony, Id like to get away at least once this winter, if you or anyone else is looking to do some cost sharing Im interested.
http://en.wikipedia.org/wiki/Rexburg,_Idaho#Climate
not so much in the winter.
Twitch, I have only ever ridden dunes at st anthony, Id like to get away at least once this winter, if you or anyone else is looking to do some cost sharing Im interested.
- Fri Nov 01, 2013 7:55 am
- Forum: Technical
- Topic: Cylinder boring
- Replies: 3
- Views: 845
- Tue Oct 29, 2013 8:30 am
- Forum: Technical
- Topic: Battery Charger
- Replies: 12
- Views: 802
Re: Battery Charger
I charge all my batteries up, verify the same voltage within a tenth or two, connect them all in parallel, hook up a "smart charger" and forget them for the winter.
- Sun Oct 13, 2013 1:26 pm
- Forum: Technical
- Topic: Fastway F5 serrated insert tool
- Replies: 7
- Views: 722
Re: Fastway F5 serrated insert tool
Also, I like to replace the pin that holds the pegs on the bike with a bolt and a nylon nut on it. It keeps the ears together better (and the holes from elongating) as these pegs tend to do that to the mounting brackets on the frame. Haven't had an issue with that since I started using the bolts bu...
- Fri Oct 11, 2013 2:20 pm
- Forum: Technical
- Topic: Fastway F5 serrated insert tool
- Replies: 7
- Views: 722
Re: Fastway F5 serrated insert tool
Just a regular old 12 point socket doesnt work? http://www.google.ca/imgres?imgurl=http://www.steritool.com/images/product/12_point_socket_3_8.jpg&imgrefurl=http://www.steritool.com/tools/12pt_sockets.htm&h=480&w=576&sz=113&tbnid=ZGfZ5sKSEv9s7M:&tbnh=105&tbnw=126&zoom=1&usg=__8jaAYacsmJknny1cXG8NadW...
- Fri Sep 27, 2013 7:24 pm
- Forum: Technical
- Topic: Found some Trelleborg winter tires
- Replies: 17
- Views: 2525
Re: Found some Trelleborg winter tires
If you can get them to the border before wednesday afternoon I can pick them up for you. Im running down to ship out and pick up.
- Fri Sep 20, 2013 9:08 am
- Forum: Technical
- Topic: 2014 Husqvarna's
- Replies: 29
- Views: 2347
Re: 2014 Husqvarna's
Dude wrote:who's Steve O.....?
Sorry, just had to......
- Wed Sep 18, 2013 3:26 pm
- Forum: Technical
- Topic: 2014 Husqvarna's
- Replies: 29
- Views: 2347
Re: 2014 Husqvarna's
I understand that 2T means 2 stroke but where did the T come from?