Search found 917 matches

by axel99
Fri Mar 25, 2022 8:01 pm
Forum: Technical
Topic: Penny Tech - Plug wrench Mod
Replies: 2
Views: 4263

Penny Tech - Plug wrench Mod

Hi, This for all you hard core Dualsport guys that like to ride 2T when you really want to have fun. A good tool kit is minimal but can still do a top end in the bush. Its all about making the most of the tools in your kit and making room for more. I was not able to source a 27mm nut without spendin...
by axel99
Wed Jun 10, 2020 6:51 am
Forum: Technical
Topic: JD jetting chart for mikuni
Replies: 1
Views: 3909

Re: JD jetting chart for mikuni

I got a copy of the jetting guide, thanks
by axel99
Thu Jun 04, 2020 7:24 am
Forum: Technical
Topic: JD jetting chart for mikuni
Replies: 1
Views: 3909

JD jetting chart for mikuni

Hi, any one have a copy of the jd jetting chart for a ktm 250 with the mikuni carb. Bought a bike with the kit installed but no jetting chart
Thanks
by axel99
Thu Sep 19, 2019 3:29 pm
Forum: Want Ads
Topic: WTB 2017 Husqvarna Fork and Shock Springs: TE300 and FE501
Replies: 5
Views: 7132

Re: WTB 2017 Husqvarna Fork and Shock Springs: TE300 and FE501

What rates and lengths are you looking for?
by axel99
Fri Jun 14, 2019 3:18 pm
Forum: Bikes For Sale
Topic: 2016 KTM 350XCF For Sale
Replies: 0
Views: 6042

2016 KTM 350XCF For Sale

2016 KTM 350XCF For Sale - P3 skid plate and Obie Link guard - scorpion Rad guards - new side and front number plastics (not in the pics, keeping my old plastics) - forks have race-tech compression bases, valving for a 200lbs rider, can be converted back to stock config if you prefer. - TM Designs c...
by axel99
Fri Jun 14, 2019 2:40 pm
Forum: Bikes For Sale
Topic: 2007 Kawasaki KLX125
Replies: 0
Views: 5672

2007 Kawasaki KLX125

Asking $1400
IMG_0959[1].JPG
IMG_0958[1].JPG
You can PM me or Text\Call 403-819-0026
by axel99
Tue Jun 04, 2019 3:03 pm
Forum: Technical
Topic: Countershaft
Replies: 6
Views: 5670

Re: Countershaft

Maybe my bad , last counter shaft bearing i replaced was a garden variety ball bearing. Read the op again and sounds like some fancy speciality caged bearing design. I am out
by axel99
Tue Jun 04, 2019 6:49 am
Forum: Technical
Topic: Countershaft
Replies: 6
Views: 5670

Re: Countershaft

Sounds like you are talking about what is called a dust seal that sits between the inner and outer race of the bearing. It can be removed if it’s a concern.
by axel99
Fri May 24, 2019 10:27 am
Forum: Technical
Topic: Cheap Grip Heaters
Replies: 10
Views: 7392

Re: Cheap Grip Heaters

If the ground is not floating on the circuit you use from the stator, the full wave rectifier will only convert half the ac current to dc. Yeah this feels like dejavu. Lower right corner of the attached diagram is the hookup you should have, since you have not floated the ground. Based on a quick re...
by axel99
Fri May 24, 2019 7:43 am
Forum: Technical
Topic: Cheap Grip Heaters
Replies: 10
Views: 7392

Re: Cheap Grip Heaters

I just notice you update. Your rectifier is only converting half the power from the ac yellow wire to dc( half the ac wave). Read up on floating the ground and full wave rectifiers. Tons of power for the led, and leds will not really dim much as you drop voltage and have a wide operating volt range,...
by axel99
Fri May 24, 2019 7:25 am
Forum: Technical
Topic: Cheap Grip Heaters
Replies: 10
Views: 7392

Re: Cheap Grip Heaters

If you tap into the stock headlight that’s AC Current and it will burn up a relay not designed for that. If tap into the battery like Dave mention a relay is best as it removes the inefficiency of the control switch. Also use a least a gauge wire down(heavier) from the pigtails on the grip heaters. ...
by axel99
Wed May 01, 2019 3:25 pm
Forum: General Topics
Topic: McNutt '19
Replies: 3
Views: 5674

Re: McNutt '19

Looks awesome.
by axel99
Mon Mar 18, 2019 3:27 pm
Forum: Land Advocacy
Topic: UCP pitches $30 permit fees for trail users if elected
Replies: 16
Views: 21735

Re: UCP pitches $30 permit fees for trail users if elected

scubarusteve wrote:Ive got no issues with the fee as long as it keeps riding areas open with potential of new trails :thumbsup:
I am thinking you mean make existing trails legal to actually create a usable well connected trail network. :thumbsup:
by axel99
Thu Dec 13, 2018 8:08 am
Forum: General Topics
Topic: Neck braces- not a opinion article
Replies: 4
Views: 6128

Neck braces- not a opinion article

Hi, thought this was a good read passed along by Cedric. Data seemed quite convincing to me.

https://www.cyclenews.com/2018/12/artic ... ess-study/
by axel99
Fri Nov 16, 2018 9:06 pm
Forum: Technical
Topic: Suggestions on who to call to remove this screw? Machine Shop?
Replies: 4
Views: 5099

Re: Suggestions on who to call to remove this screw? Machine Shop?

Well you haven't destroyed it yet. Could just leave it alone. Set screws are hard steel, they need to be. I think you need to relieve the outer tension on the threads in one of 2 ways. 1. drill a hole close to the inner thread diameter, chances such a small bit will drift and meet the threads. 2. us...